BakFlip G2, HD & F1 Features
 |
 |
 |
 |
| Panel Exterior | Aluminum | Aluminum | Fiberglass-Reinforced Polymer Top, Aluminum Underside |
| Panel Core | EPS - 2lb core | EPS - 3 lb core | EPS High Density - Stays Cool To Touch |
| Panel Frames | Aluminum | Aircraft-Grade Aluminum | Aircraft-Grade Aluminum |
| Finish | Hair Cell Texture | Black Powder Coat | Fiberglass UV Protectant Powder Coat |
| Thickness | 1/2 Inch | 5/8 Inch | 5/8 Inch |
| Cover Weight | 60 lbs. | 55 lbs. | 50 lbs. |
| Weight Rating | 250 lbs. (evenly distributed) | 300 lbs. (evenly distributed) | 400 lbs. (evenly distributed) |
| Warranty | 1 Year | 2 Years | 2 Years |
| Starting At: | $627.63 | $789.88 | $839.88 |
- Entire Bed Access!
- The BakFlip gives you access to virtually all of your truck bed without removing the cover. It flips open to reveal 1/4, 1/2, 3/4, or all of your truck bed. All panels lock into place at any position, and protects your rear window when folded all the way up. The BakFlip works with all bed extenders, and you can unlatch the cover from both the driver's and passenger's side. Your BakFlip tonneau cover is backed by a 1-year warranty and bulit with pride in the USA.
- Construction
-
The BakFlip is now available in two models: the G2 and the new HD series. The G2's panels are built from a honeycomb core laminated with ABS plastic. This strong yet light panel material holds up to 200 lbs of evenly distributed weight while weighing in at an easily manageable 40 lbs. The outer ABS has a slightly textured finish that perfectly matches the looks of door handles and other exterior trim.
-
The new HD series BakFlip boasts all-aluminum panels, which make it both stronger and lighter than the G2. The HD can support up to 300 lbs of evenly distributed weight and weighs in four pounds lighter than the G2. HD panels feature powder-coated paint that is baked on for an ultra-durable finish. This finish has gone through salt spray, acid, fertilizer, gas and water tests with 5-star results across the board. This cover is truly designed to outlast your truck! BAK Industries supports this claim with a 10 YEAR WARRANTY on the HD finish.
-
Both models of the BakFlip tonneau cover feature newly designed rubber side seals that attach with tongue and groove, rather than tape. The reinforced panel frames are 3 times as robust and have integrated drain channels under them. The redesigned latch system slides from side to side in extruded channels for optimum latching. These extrusions also greatly strenthen the cover. Say goodbye to over-pressured gas struts - the new modular locking arm stays keep the cover up permanently and allow you to drive with the cover open if needed. All components are now glass filled nylon and never painted - no screws will rust or peel.
- Effortless Installation & Speedy Removal
- The BakFlip installs in less than 45 minutes and requires no drilling! The self-tightening screws require only one wrench to install. To remove, simply fold up all the way to the cab & loosen 2 Nylon Wing-Nuts. The cover is off the truck in about 2 minutes! For more information, an installation video, and vehicle-specific FAQs, see our Installation Page.
- All Season Friendly
- The BakFlip is weatherproof, keeping your cargo area nice and dry. Since the BakFlip is made of specially chosen weather resistant components and engineered with as few moving parts as possible, they are extremely water tight. While it is impossible for any cover to claim being 100% water proof, BakFlip covers can be relied upon to keep in excess of 98% of any water out of the truck bed. There are 2 drain hoses in the front of each rail that funnel water that’s collected in the rail system out of the bed. Since 99% of trucks are raised at the back and lower at the front end, these drain tubes are uniquely position at the far front corners of the bed to ensure that they work optimally. Snow and ice are no match for the BakFlip. Simply break any ice build up off the cover or sweep off snow. The BakFlip is designed to perform in extreme temperatures. Since the panels are impact resistant, they cannot dent, so even hail is not a problem. Specially engineered front and rear gaskets seal the cover at the cab end and tailgate end of the truck. This keeps moisture out and ensures tighter security on a whole.
- Security
- BakFlip covers are made of multiple panels. These panels automatically lock as you close them. The only way to release these hard folding panels is to pull on a latch cable secured under the cover. Doing so will allow you to fold each panel forward. When the panels are closed you cannot open the cover without access to the under-side of the BakFlip panels. LOCKING YOUR TAILGATE will result in the cover being completely impregnable. If your truck does not have a locking tailgate then a tailgate lock such as a pop n' lock can be simply added. The latches secure the cover on both sides and the panels can be operated from either the driver or passenger side of the truck bed. This means it is convenient to operate the cover from either side. All BakFlip’s have tamper-proof locking slam latches which offer maximum “out of sight – out of mind” security and peace of mind
- Improved Fuel Economy & Low Profile Design
- With the BakFlip closed, wind drag is minimized resulting in improved gas mileage - up to 10% improvement! The BakFlip lies completely flat, when viewing from the side of the truck it is hard to tell anything is even there!
